Welcome to the original

U075-3



U075-3

Horizontal lifting of up to 750 kg with 3 suction pads for variable transport goods.


Extremely well thought-out - down to the last detail:

With the manual disconnection and connection of the outer suction pads, the U075-3 is perfectly aligned to the size and holding points of the goods to be transported. & Nbsp;

Through this circuit combines all the advantages of the U075-E and the U075-2 in one system. & nbsp; The circuit of the suction pads can be controlled easily, intuitively and quickly with a manual valve.

The U075 series stands for robust, energy self-sufficient systems that are used as all-rounders precisely where high loads have to be lifted reliably and safely. For optimal integration of the system into your processes, it can be perfectly tailored to the individual requirements in use - indoors and outdoors. & Nbsp; . & nbsp; & nbsp;

Like all models in the Green Line, the U075 series is characterised by simple, intuitive operation. For example, the crane control or the automatic switching of the vacuum when putting on and taking off guarantee smooth transport. The suction cups and sealing rings made of high-quality rubber guarantee that even the most sensitive surfaces are not damaged by scratches.

Standards of all Green Line VacuLifter®

Energy-independent

< li> Standard and individual solutions
  • 30 year guarantee on availability of spare parts
  • Made in Germany & nbsp;

  • The VacuLifter® U075-3 comes with a wide range of optional extensions such as a changing set, a transport trolley, water separator, Ergo-Flex handle, a forklift traverse, and foldable parking supports. & nbsp;


    Type

    U075-3

    Payload

    750 kg

    Max. load dimension (reference sheet metal)

    3000 x 1500 mm

    Min. load dimension

    Ø 350 mm

    Min. thickness (for steel)

    2 mm

    Dead weigth

    134 kg

    Suction pads no./size

    3/ Ø 350 mm

    Minimum load

    20 kg

    Length x widht x switching height

    2350 x 350 x 1180 mm


    Change set Transport trolley Water separator Forklift traverse Parking supports Suction pad shut-off via manual valve Foldable beam Weld-on hook

    Change set

    The interchangeable set enables different suction pads and compact truss units to be connected via a pin connector and a vacuum quick-release coupling. The suction pad can be replaced quickly and easily without having to separate the VacuLifter from the crane hook. The exchange set is available for loads up to 300 kg. For higher load capacities only available on request.

    Zurück

    Transport trolley

    The rollable transport trolley ensures maximum mobility. The free-standing loading area, where the suction pads float freely during transport, protect the suction pad seals (sealing rings).

    Zurück

    Water separator

    The water separator is particularly recommended for use in a damp environment (e.g. in the area of a water jet cutter or outdoors). The fill level can be viewed at any time through the glass and can be emptied using the drain screw if necessary. This optional accessory prevents moisture from getting inside the device and thus prevents possible corrosion.

    Zurück

    Forklift traverse

    For the use of VacuLifters on a forklift truck, the forklift traverse is required, which is available in different load capacities (630, 1,500 and 2,500 kg). When selecting the appropriate forklift traverse, it should be noted that the weight of the VacuLifter must be added to the maximum load weight.

    Zurück

    Parking supports

    The parking supports provide maximum protection for the suction pads and the sealing rings. If the VacuLifter is not used in the meantime and is parked by the crane, for example, it can be equipped with the fold-up parking supports. When the parking supports are folded down, the suction pads float above the ground and are protected from damage and contamination. In addition, the parking supports can be used as an additional handle / guide handle in a horizontal position and in a vertical upward position. The Green Line VacuLifter can therefore also be operated from the front.

    Zurück

    Suction pad shut-off via manual valve

    The suction pad can be switched off individually or in pairs using additional manual valves. This is an advantage when individual suction pads are not required for a short time. For example, if there are cut-outs in the load or if a smaller dimension is to be transported and the operator cannot or does not want to change the suction pad position and / or crossbar position.

    Zurück

    Foldable beam

    A foldable beam is required if shorter loads, e.g. must be placed in a box or on a table, but an overall longer main traverse for larger load dimensions cannot be dispensed with. The folding traverse guarantees a high degree of flexibility, which prevents a collision with possible obstacles.

    Zurück

    Weld-on hook

    Weld-on hooks make the VacuLifters even more practical. The weld-on hook can easily be attached to different positions in order to hang in different loads.

    Zurück