Change set

The interchangeable set enables different suction pads and compact truss units to be connected via a pin connector and a vacuum quick-release coupling. The suction pad can be replaced quickly and easily without having to separate the VacuLifter from the crane hook. The exchange set is available for loads up to 300 kg. For higher load capacities only available on request.

Back

Transport trolley

The rollable transport trolley ensures maximum mobility. The free-standing loading area, where the suction pads float freely during transport, protect the suction pad seals (sealing rings).

Back

Water separator

The water separator is particularly recommended for use in a damp environment (e.g. in the area of a water jet cutter or outdoors). The fill level can be viewed at any time through the glass and can be emptied using the drain screw if necessary. This optional accessory prevents moisture from getting inside the device and thus prevents possible corrosion.

Back

Ergoflex operating handle

The Ergoflex operating handle offers a number of ergonomic advantages in addition to the standard handle. It can be swiveled by approx. 135 ° so that the height of the handle can be adapted to the operator or the application. The additional telescoping of the handle from 675 to 1030 mm also generates better accessibility, e.g. when transporting wide loads.

Back

Forklift traverse

For the use of VacuLifters on a forklift truck, the forklift traverse is required, which is available in different load capacities (630, 1,500 and 2,500 kg). When selecting the appropriate forklift traverse, it should be noted that the weight of the VacuLifter must be added to the maximum load weight.

Back

Parking supports

The parking supports provide maximum protection for the suction pads and the sealing rings. If the VacuLifter is not used in the meantime and is parked by the crane, for example, it can be equipped with the fold-up parking supports. When the parking supports are folded down, the suction pads float above the ground and are protected from damage and contamination. In addition, the parking supports can be used as an additional handle / guide handle in a horizontal position and in a vertical upward position. The Green Line VacuLifter can therefore also be operated from the front.

Back

Suction pad shut-off via manual valve

The suction pad can be switched off individually or in pairs using additional manual valves. This is an advantage when individual suction pads are not required for a short time. For example, if there are cut-outs in the load or if a smaller dimension is to be transported and the operator cannot or does not want to change the suction pad position and / or crossbar position.

Back

Foldable beam

A foldable beam is required if shorter loads, e.g. must be placed in a box or on a table, but an overall longer main traverse for larger load dimensions cannot be dispensed with. The folding traverse guarantees a high degree of flexibility, which prevents a collision with possible obstacles.

Back

Weld-on hook

Weld-on hooks make the VacuLifters even more practical. The weld-on hook can easily be attached to different positions in order to hang in different loads.

Back

Green Line

U400-6

U400-6

Change set

Transport trolley

Water separator

Ergoflex operating handle

Forklift traverse

Parking supports

Suction pad shut-off via manual valve

Foldable beam

Weld-on hook

U400-6

Green Line