Welcome to the original

U400-10Q



U400-10Q

Horizontal lifting of up to 4,000 kg with 10 suction pads for variable loads.


6,200 x 2,500 mm load dimensions, with a material thickness of at least 2 mm (for steel) and a weight of 4 tons. The performance figures for this system are more than impressive. & Nbsp;

For variable use, the U400-10Q can also be equipped with continuously adjustable crossbars and external suction cups that can be switched on and off. "

The U400 series is the ultimate solution for energy self-sufficient lifting of goods up to 4 tons - with the same ease and intuitive operation as the small U01 series. The U400 is coming For use where there are no longer any compromises - neither in terms of load nor use. The U400 series can also be perfectly tailored to the individual requirements in use - inside and outside. & nbsp; & nbsp;

Like all models in the Green Line, our most powerful series is characterised by maximum sensitivity in handling the goods to be transported. The tried and tested crane control or the automatic switching of the vacuum when setting up and setting down ensure smooth transport - even with the heaviest loads There are no scratches on the most sensitive surfaces, we have also protected the suction pads and sealing rings with high-quality rubber.

Standards of all Green Line VacuLifter®

Energieu independent

  • Standard and individual solutions
  • 30 year guarantee on spare parts availability
  • Made in Germany & nbsp;

  • The VacuLifter® U400- 10Q is available with a variety of optional extensions such as a transport trolley, water separator, Ergo-Flex handle and also a crossbeam for forklift use, suction cup shut-off via manual valve, foldable parking supports, a folding beam or a weld-on hook. & Nbsp;


    < / div>

    Type

    U400-10Q

    Payload

    4000 kg

    Max. load dimension (reference sheet metal)

    6200 x 2500 mm

    Min. load dimension

    480 x 1360 mm

    Min. thickness (for steel)

    2 mm

    Dead weigth

    1046 kg

    Suction pads no./size

    10/ Ø 480 mm

    Minimum load

    100 kg

    Length x widht x switching height

    4800 x 1650 x 1990 mm


    Change set Transport trolley Water separator Ergoflex operating handle Forklift traverse Parking supports Suction pad shut-off via manual valve Foldable beam Weld-on hook

    Change set

    The interchangeable set enables different suction pads and compact truss units to be connected via a pin connector and a vacuum quick-release coupling. The suction pad can be replaced quickly and easily without having to separate the VacuLifter from the crane hook. The exchange set is available for loads up to 300 kg. For higher load capacities only available on request.

    Zurück

    Transport trolley

    The rollable transport trolley ensures maximum mobility. The free-standing loading area, where the suction pads float freely during transport, protect the suction pad seals (sealing rings).

    Zurück

    Water separator

    The water separator is particularly recommended for use in a damp environment (e.g. in the area of a water jet cutter or outdoors). The fill level can be viewed at any time through the glass and can be emptied using the drain screw if necessary. This optional accessory prevents moisture from getting inside the device and thus prevents possible corrosion.

    Zurück

    Ergoflex operating handle

    The Ergoflex operating handle offers a number of ergonomic advantages in addition to the standard handle. It can be swiveled by approx. 135 ° so that the height of the handle can be adapted to the operator or the application. The additional telescoping of the handle from 675 to 1030 mm also generates better accessibility, e.g. when transporting wide loads.

    Zurück

    Forklift traverse

    For the use of VacuLifters on a forklift truck, the forklift traverse is required, which is available in different load capacities (630, 1,500 and 2,500 kg). When selecting the appropriate forklift traverse, it should be noted that the weight of the VacuLifter must be added to the maximum load weight.

    Zurück

    Parking supports

    The parking supports provide maximum protection for the suction pads and the sealing rings. If the VacuLifter is not used in the meantime and is parked by the crane, for example, it can be equipped with the fold-up parking supports. When the parking supports are folded down, the suction pads float above the ground and are protected from damage and contamination. In addition, the parking supports can be used as an additional handle / guide handle in a horizontal position and in a vertical upward position. The Green Line VacuLifter can therefore also be operated from the front.

    Zurück

    Suction pad shut-off via manual valve

    The suction pad can be switched off individually or in pairs using additional manual valves. This is an advantage when individual suction pads are not required for a short time. For example, if there are cut-outs in the load or if a smaller dimension is to be transported and the operator cannot or does not want to change the suction pad position and / or crossbar position.

    Zurück

    Foldable beam

    A foldable beam is required if shorter loads, e.g. must be placed in a box or on a table, but an overall longer main traverse for larger load dimensions cannot be dispensed with. The folding traverse guarantees a high degree of flexibility, which prevents a collision with possible obstacles.

    Zurück

    Weld-on hook

    Weld-on hooks make the VacuLifters even more practical. The weld-on hook can easily be attached to different positions in order to hang in different loads.

    Zurück